📄️ 206e
Mixer and Preset Manager
📄️ 206e
Mixer and Preset Manager
📄️ md
Buchla Module
📄️ 207e-md
Buchla 207e
📄️ Model 207e Mixer / Preamplifier
A dual function module, the top section is a 6 in by 2 out mixer identical to the 206e mixer; the bottom section is a microphone preamplifier, to be described subsequently.
📄️ 210e-md
The Buchla 210e
📄️ Buchla 210e
Control Voltage and Signal Router
📄️ Description - model 223e Tactile Input Port
The 223 Tactile Input Port is a mutation of the 222e Kinesthetic Input Port; it drops the ring sensors in favor of a simple arpeggiation function. We'll deal first with the tactile surface and its outputs; then with the arpeggiation.
📄️ 223e-md
Buchla 223e
📄️ 225e
Description - model 225e MIDI Decoder
📄️ 227e-md
The Buchla 227e
📄️ **Model 227e System Interface**
This module performs various signal manipulations, prior to sending them to an external sound system.
📄️ 230e-md
The Buchla 230e
📄️ 230e
Model 230e Triple Envelope Tracker
📄️ 250e-md
Buchla 250e
📄️ **250e Arbitrary Function Generator**
The 250e is a 16 stage function generator. Each stage stores two control voltages, which are set with an array of 16 potentiometers. Time values are adjusted with a parallel array of smaller potentiometers, and can serve as a third control voltage. Time can also be synchronized to MIDI clock sent via the 225e. Both control voltages and times can be interpolated, quantized, or replaced with externally applied voltages for selected stages.
📄️ 251e-md
Buchla 251e
📄️ 251e Quad Sequential Voltage Source
Four independent sequencers, each with a pulse output and control voltage output for each of 50 stages. A separate editing section provides for setting each parameter for a selected sequence; the sequence may proceed while editing a particular stage, or the edit section can track the sequencer, displaying parameters in real time, but disabling edit procedures.
📄️ Model 252e Polyphonic Rhythm Generator
The 252e sequences pulse patterns and CV values stored in the cells of eleven concentric rings. Ring cells resemble the stages of more conventional sequencers, but the architecture of the 252e allows for interesting and unusual possibilities not previously available. Four pulse outputs and six CV outputs can be assigned freely amongst the cells. Each of the three clocks can be assigned to any of the 11 rings and synchronized to generate two- and three-part polyrhythms and polymetric patterns. Pulses and CVs can be shifted independently within a ring. Pitch and velocity CV pairs can be captured from MIDI input – while editing and during performance. The 252e can synchronize to - or generate - MIDI clock. A Euclidian pattern generator is included to serve as a rhythmic library.
📄️ 256e-md
Buchla 256e
📄️ Quad Control Voltage Processor model 256e
This module offers various sorts of control voltage processing, including selection, multiplication, addition, scaling, inversion, and non-linear transformation. Its four sections are identical and independent. A description of section A follows, and is applicable to sections B, C, and D.
📄️ 257
Control Voltage Processor model 257e
📄️ 259e-md
Buchla Module
📄️ Model 259e Twisted Waveform Generator
The 259e consists of two separate oscillators. One, the modulation oscillator, serves primarily to modulate the second, called the principal oscillator.
📄️ presetmanager-dbjd
The Preset Manager (225e or 206e):